Introduction to metal separator
The metal separator adopts German technology and has high sensitivity.It is used to detect metals in flake, powder and granular products.At least iron beads with a diameter of more than 0.3mm or slender metal wires and larger metal objects can be detected.Even if metal objects are sealed inside the product, they can be detected.The detected metal and some products are discharged through the outlet by controlling the cylinder bar through the solenoid valve.It solves the harm of metal objects in the plastic industry when processing and recycling plastics, manufacturing plastic particles and manufacturing plastic products.It avoids the scratch and blockage caused by metal to the injection molding machine and extruder.The production efficiency and the qualified rate of products are improved
Metal separator parameters
|
Model |
LMS25 |
LMS35 |
LMS50 |
|
Channel size |
Φ25mm |
Φ35mm |
Φ50mm |
|
Detection speed |
200-300Kg/h |
300-400Kg/h |
700-800Kg/h |
|
Product falling height |
＜500mm |
||
|
Suitable products |
Granular/powdery/flake |
||
|
Mode of use |
Free fall |
||
|
Separation mode |
Automatic separation |
||
|
Installation mode |
Vertical installation |
||
|
Product temperature |
＜80℃ |
||
|
ambient temperature |
-10~80℃ |
||
|
air pressure |
3~5Bar |
||
|
working voltage |
AC220-240V,50/60Hz |
||
|
texture of material |
Low carbon steel plate |
||
|
length,width,height |
310*325*400mm |
||
|
Maximum sensitivity |
Fe≥φ0.3mm 304SUS≥φ0.6mm Non-Fe≥φ0.4mm |
Fe≥φ0.4mm 304SUS≥φ0.8mm Non-Fe≥φ0.5mm |
Fe≥φ0.5mm 304SUS≥φ1.0mm Non-Fe≥φ0.6mm |
*Detection speed:
The actual detection speed is related to the density, fluidity and speed of the product
*Sensitivity
The above is the highest sensitivity without any effect.In actual use, it will be affected by the shape and direction of metal, service environment and products.Spherical metal is usually used as the standard
|
Model |
LMS65 |
LMS80 |
LMS100 |
|
Channel size |
Φ65mm |
Φ80mm |
Φ100mm |
|
Detection speed |
800-1000Kg/h |
1000-1200Kg/h |
1200-1400Kg/h |
|
Product falling height |
＜500mm |
||
|
Suitable products |
Granular/powdery/flake |
||
|
Mode of use |
Free fall |
||
|
Separation mode |
Automatic separation |
||
|
Installation mode |
Vertical installation |
||
|
Product temperature |
＜50℃ |
||
|
ambient temperature |
-10~50℃ |
||
|
air pressure |
3~5Bar |
||
|
working voltage |
AC220-240V,50/60Hz |
||
|
texture of material |
Low carbon steel plate |
||
|
length,width,height |
310*325*400mm |
410*380*500mm |
|
|
Maximum sensitivity |
Fe≥φ0.7mm 304SUS≥φ1.2mm Non-Fe≥φ0.8mm |
Fe≥φ0.9mm 304SUS≥φ1.5mm Non-Fe≥φ1.0mm |
Fe≥φ1.5mm 304SUS≥φ2.0mm Non-Fe≥φ1.6mm |
*Detection speed:
The actual detection speed is related to the density, fluidity and speed of the product
*Sensitivity
The above is the highest sensitivity without any effect.In actual use, it will be affected by the shape and direction of metal, service environment and products.Spherical metal is usually used as the standard
